You know that feeling when you finally find the tree that looks exactly right — and then realize you have no idea how to actually get there?
We spent serious time browsing Target, Hobby Lobby, and Amazon to bring you only what’s worth your attention this year. The range here runs from about $18 for a set of ornaments to $450 for a full flocked tree, so there’s a version of every idea at every budget.
Inside you’ll find 31 curated ideas covering rustic traditional, flocked glam, red-and-green classic, and neutral minimal styling — with budget and luxury versions compared side by side, plus shoppable product links for almost everything.
In 2026 the shift is toward trees that look collected rather than purchased: mixed ribbon widths, vintage glass, and non-red-and-green palettes that still read traditional. And stay until the end — we break down the most common mistakes that can ruin these looks.
Some links in this guide are affiliate links — if you buy through them, we may earn a small commission at no extra cost to you.
📌 Save this to Pinterest for later — you’ll want to revisit these ideas.
1. Plaid Ribbon Tree with Navy and Copper Accents
Cut plaid ribbon into 10-inch lengths, fold each into a soft loop, and twist the two tails together behind the loop before you tuck it into the branch. Ribbon laid flat against a branch looks pasted on. A wired, folded loop holds its shape and catches the string lights from underneath. Plan on 14 to 18 loops for a 7.5-foot tree, spaced no closer than 8 inches apart so the plaid reads as a rhythm instead of a stripe.
The navy is doing the heavy lifting. Strip away the blue berry clusters and the navy-wrapped packages and you’re left with a perfectly nice rustic tree — forest green, tan plaid, copper, done. The blue is what makes it feel collected instead of catalog-ordered. It also gives the copper orange somewhere to sit; against the stone fireplace and the evergreen garland, that cool note keeps the whole corner from turning into one warm brown blur.
2. Wood Bead Garland and Taupe Velvet Ribbon
Wood bead garlands need room to sag. On a 7.5-foot tree you want at least 9 feet of garland so it can drape in four or five soft loops instead of stretching tight like a necklace. This look lives comfortably in a room 10 by 12 feet or larger with a 9-foot ceiling. Anything tighter and the taupe velvet starts reading as clutter. Working with lower ceilings? Idea #6 shows the slim-tree answer.
A 6-foot strand of wood bead garland runs about $35 at craft stores. You can string your own with 20mm unfinished beads and jute twine for around $12 and nobody will know. For the velvet, skip the designer spool — Walmart and Target both carry taupe velvet ribbon by the yard for $4 to $6, and thrifted velvet scarves cut into strips work beautifully. The whole garland-and-ribbon layer comes in under $30.
3. Flocked Tree with Gold Bows Against White Built-Ins
Two things are happening. First, contrast — saturated red and green glass against white-flocked branches reads crisp instead of muddy, because the flocking lightens the negative space between ornaments. Second, repetition: gold shows up in the bows, the baubles, the star topper, and the tree collar. Four touchpoints of the same metal turn a pile of ornaments into a composition. The white built-ins behind it act as a light backdrop, which is exactly why this tree photographs so well.
Skip the fabric skirt if you’re using a collar — but get the diameter right. A 22- to 24-inch collar sits properly around the base of a 7.5-foot tree; anything smaller and the metal stand peeks out the sides. Measure your stand’s widest point first, then add 6 inches. On hardwood, add a felt pad under the collar, because flocking sheds and a gold collar will scratch a floor finish over a season of small adjustments.
4. Pinecone-Only Tree Against Crisp Wainscoting
Sparse decorating exposes the tree itself, which means the tree has to be good. A thin, cheap artificial tree with wide gaps will look bald with only pinecones on it — there’s nothing to hide behind. Either buy a dense realistic-branch tree or use a real fir. Pinecones are also heavy at the tip, so wire them close to the trunk on lower branches, and keep them off the bottom third if you have a dog who thinks everything is a fetch toy.
The formula here is roughly 70 percent green foliage, 20 percent warm brown pinecone, 10 percent crisp white and black hardware. That ratio is what keeps it feeling calm instead of unfinished. Want to shift it? Swap pinecones for dried orange slices and keep the same 70/20/10 split. Swap the black metal stand for a woven basket and the whole thing warms up two notches without changing a single ornament.
5. Patriotic Bow Tree in a Paneled Formal Room
Fresh garland on a mantel is gorgeous for about nine days. After that it drops needles onto the hearth, dries out fast near a fire, and needs water every other day — sometimes daily in a heated room. If you want the look without the chore, use a high-quality faux cedar garland and add real eucalyptus sprigs for scent. The patterned bows are fabric, so steam them once before hanging and they’ll hold their shape all season.
This is a tall-room look. The tree is doing real architectural work here, so plan on a 9- to 12-foot tree in a room with at least 11-foot ceilings and 14 by 16 feet of floor space to keep the mantel, mirror, and portrait from feeling crowded. Below 9-foot ceilings, scale your ribbon widths down by a third. For tighter rooms, Idea #21 keeps the same red-and-gold spirit on a normal-sized footprint.
6. Slim Berry-Laden Tree Against Deep Blue Walls
The dark blue paneling. Put this exact tree against a beige wall and it’s pretty. Against deep blue, the red berries go jewel-toned and the gold bead garland suddenly looks lit from inside. Dark walls absorb light and make metallics pop, which is why the built-in shelves beside it read as glowing. If you can’t paint, a dark blue curtain panel or a large canvas behind the tree gets you about 70 percent of the effect.
- Buy 12 to 18 berry spray picks — deep red and gold mixed.
- Clip each stem to 6 to 8 inches with wire cutters.
- Wire them into branch tips at the outer edge, not deep inside.
- Cluster in threes on the lower third, singles up top.
- Step back every five picks and check the silhouette.
Time: about 45 minutes. Materials: $40 to $70 depending on pick quality.
7. Flocked Tree with a Skirted Console and Lantern
- Flocked 7.5-foot tree: $180–$450
- Gold and silver ornament set, 60 count: $40–$90
- Ribbon and banner garland: $20–$45
- White lantern plus pinecones and filler ornaments: $35–$70
- Pleated fabric to skirt the console: $25–$60
- Two small metallic tabletop trees: $18–$40
- Total: $318–$755
Budget alternative: a pre-lit flocked tree from Walmart at $129, a thrifted lantern, and a bedsheet as the console skirt lands the same look for roughly $200.
The skirted-console move is pure cottage-quiet-luxury crossover. It borrows from the English country house habit of covering an ugly table with gathered fabric, then pairs it with flocking — a finish that’s been climbing on Pinterest every year since 2021 with no sign of stopping. What makes it stick in 2026 is practicality: flocked trees hide gaps, photograph beautifully, and work in rooms where a fully decorated tree would feel like too much.
8. Traditional Tree Styling Rules That Still Hold in 2026
- Measure ceiling height minus tree height minus topper — you need at least 6 inches of clearance.
- Find the nearest working outlet and count how many free plugs it has.
- Test every light strand on the floor before it goes on the tree.
- Decide your color story before you open a single box of ornaments.
- Set a budget ceiling you’ll actually honor.
Traditional styling survives because it follows two rules most trends ignore: symmetry and warm light. Symmetry gives the eye a resting pattern, so a tree reads as one object instead of a pile of decorations. Warm light — 2700K to 3000K — flatters nearly every color from crimson to cream and hides the plastic sheen on inexpensive ornaments. Change your palette every year if you like; keep those two principles and it will still look traditional.
9. Red Velvet Bows and Gold Glitter Poinsettia Picks
Glitter poinsettia picks are the fastest way to make a standard tree look expensive. Use five to seven on a 7.5-foot tree — not twenty. One near the topper, two flanking it, and the rest spread through the lower half where the branches are widest. Bend each stem so the bloom faces outward and slightly up. Cluster them near your red velvet bows, because glitter and velvet together read as one luxurious gesture instead of two competing decorations.
Dollar Tree sells small poinsettia picks for $1.25 that look thin up close but fine from across a room — or upgrade them yourself with spray adhesive and fine gold glitter for about $18 total. For the deep red bows, buy velvet ribbon at a craft store during a 40-percent-off week and tie your own; a 10-yard roll makes roughly 12 bows. The whole bow-and-bloom layer lands around $35 instead of $150.
10. Gold Tinsel Tabletop Tree with Vintage Glass
Roughly 50 percent gold tinsel, 40 percent saturated vintage glass, 10 percent striped ribbon. The tinsel is the base note; the colored glass is the melody. If you want a different mood, keep the split and change the ingredients — silver tinsel with blue and teal glass reads icy, copper tinsel with amber and burgundy glass reads vintage cabin. The ratio is what keeps a small display from looking like a flea market pile.
The starburst topper. A tabletop tree this small can’t carry a big star, and a tiny star gets lost. The starburst solves both problems — same silhouette as a star, but with radiating spokes that catch light from every angle, which matters on a display sitting on a dark surface. Remove it and the tree becomes a cute object. With it, the whole vignette has a focal point.
11. Matte, Shiny, and Striped Reds on a Flocked Tree
An all-red tree is a trap. Under warm bulbs, twenty identical glossy red balls turn into a single red smear with no depth — the ornaments disappear into each other. This tree works because the reds vary: matte, shiny, and striped finishes mixed together, with bronze pieces breaking up the run. If you already own a matching red set, buy one contrasting pack in a matte or mercury finish and it will change the entire tree.
Aim for roughly equal thirds: one-third glossy, one-third matte, one-third textured. Then place the matte pieces deeper in the branches and the glossy ones at the tips. Matte absorbs light and reads as shadow, which creates depth, while glossy reflects and pulls the eye outward. Same ornament count, twice the perceived richness.
12. Red Bead Garland and a Plaid Tree Skirt
- Measure your beaded garland — you want about 2.5 times the tree height.
- Start at the top and drape in a loose spiral, letting each loop sag a hand-width below the one above.
- Anchor every third loop to a branch with a small wire hook so it doesn’t slide.
- Keep the bottom loop about 12 inches above the skirt so gifts don’t crush it.
Time: 20 minutes. Cost: $15 to $30 for a red beaded strand.
Tree skirts are sized by diameter, and most people buy one two sizes too small. For a 7.5-foot tree, use a 48- to 56-inch skirt; for a 6-footer, 36 to 44 inches. The skirt should extend past the widest lower branches by a few inches so it looks intentional rather than pinned on. A plaid skirt this size runs $30 to $60, and a plain red one at $20 does the same visual job if the plaid fights your rug.
13. Layered Gold Tinsel with Soft Pink Baubles
Tinsel does one thing better than any ornament: it creates depth inside the branches. Layered strands catch light at different depths, so the tree looks fuller than it actually is. The pink is the interesting choice — it pulls the gold away from brassy and toward warm champagne, and it softens the high contrast that gold on green normally creates. Add kraft-paper gifts and you’ve got a tree that reads traditional without a single red ornament.
- Gold tinsel garland, six strands: $18–$36
- Gold and pink bauble set: $25–$55
- Cutout reindeer ornaments: $10–$20
- Textured star topper: $12–$30
- Kraft paper and ribbon for gifts: $15–$30
- Total: $80–$171
Budget alternative: two tinsel strands from the dollar store plus thrifted pink baubles gets you there for under $30.
14. Silver Bells and Crystal Icicles in the Branches
Glass and crystal look incredible and demand a little respect. Icicle ornaments show dust and fingerprints, so they need a wipe-down before they go up each year and careful tissue wrapping when they come down. If you have toddlers, cats, or a wagging tail at ornament height, swap the faceted glass for acrylic lookalikes — same sparkle, survives a fall. Silver bells dull over time; a dry-cloth polish in November brings them back.
Metallic-neutral trees have been quietly overtaking red-and-green for a few seasons, driven by the same instinct behind the beige-kitchen wave: people want holiday decor that doesn’t fight the room eleven months of the year. Silver, clear glass, and warm white lights photograph beautifully on a phone and look calm on a dark January afternoon when you’re too tired to pack it all away. Want more sparkle with the same restraint? Idea #28 takes it up a notch.
15. Oversized Gingham and Velvet Bow Accent
You don’t need to buy bows. Two yards of red-and-white gingham and one yard of red velvet — about $18 total at a fabric store — makes four large bows once you add floral wire. Layer a gingham loop over a velvet loop, offset them slightly, and pinch the center with wire. Finish with twisted white-and-red piping from the trim aisle for $3 and you’ve got a $45 boutique bow for around $6.
Scale is everything with bow ornaments. On a 7.5-foot tree, bows should be 10 to 12 inches across; on a 6-footer, 8 inches; on a tabletop tree, 4 to 5 inches. Place one bow every 18 to 24 inches of vertical tree height and stagger them so no two sit at the same level. An oversized bow on a small tree doesn’t read as bold — it reads as a mistake.
16. Quilted Velvet Teardrops Hung in Clusters
The quilted faceting. A plain velvet ball under warm fairy lights turns into a soft blur with no highlight — pretty, but forgettable. The diamond quilting on these teardrops catches the string lights in dozens of tiny planes, so each ornament has its own internal sparkle even though the material is matte. That’s the whole reason textured velvet ornaments outperform smooth ones on a tree that already has plenty of shine.
Velvet is a magnet for dust, pet hair, and glitter from other ornaments, and it does not wash. Store them in individual tissue wraps or a divided box, not tossed in a bin with the glass, or the pile will crush flat. Hang them where they won’t rub against branches either — velvet fibers snag on artificial needles. If that sounds like too much fuss, brushed felt gives you the same matte richness with zero stress.
17. Glossy Red Baubles and Beaded Garland on Fir
60 percent green fir, 30 percent red, 10 percent warm white light and beaded garland. It’s the most traditional split there is, and it’s forgiving — swap the red for burgundy, copper, or even deep plum and the formula holds. What breaks it is going past about 35 percent red. Past that point the tree stops reading as a green tree with red ornaments and starts reading as a red tree.
- Hang your largest ornaments first, spacing them evenly around the tree.
- Fill the gaps between them with medium ornaments, following the triangle pattern the big ones created.
- Add small ornaments last — these are the filler that hides bare branches.
- Step back every two rows and look from three different angles.
Time: 60 to 90 minutes for a 7.5-foot tree. Cost: nothing but patience.
18. Two Slim Trees and a Garland-Draped Headboard
Slim trees are the trick for bedrooms. These are pencil-width — 12 to 18 inches at the base — so a pair takes up the floor space of one nightstand. You want at least 12 by 14 feet of bedroom to keep the grouping from boxing in the bed, and nothing taller than 7 feet, or the trees start competing with the headboard garland for attention. Smaller room? One slim tree on the far side of the bed works just as well. If you love the ribbon-draped garland idea on a bigger scale, Idea #5 runs it across a mantel.
- Confirm there’s an outlet within cord reach of each tree — extension cords across a bedroom floor are a trip hazard.
- Measure the gap between bed and wall; you need at least 24 inches of walking space.
- Check that your headboard can hold garland without adhesive that damages the finish.
- Decide whether the tree lights run on the same timer as your bedroom lamps or separately.
19. Wrapped Tinsel Garland and a Gold Star
- Green artificial tree, 7.5-foot: $90–$250
- Shiny red and gold baubles, 80 count: $30–$70
- Gold tinsel garland, three strands: $12–$24
- Red tinsel garland, two strands: $8–$16
- Gold star topper: $10–$25
- Total: $150–$385
Budget alternative: a $45 Walmart tree plus dollar-store tinsel and one mixed ornament set lands the same colorful look for about $85.
Tinsel garlands solve a math problem. A single strand wrapped in a spiral leaves visual gaps; two or three strands in alternating colors fill the middle of the tree so ornaments sit on top of a continuous ribbon of color instead of floating in green space. The gold star is the finisher — it’s the only thing on the tree with a silhouette that isn’t round, which is exactly why your eye goes there first.
20. Plaid Bows, Navy Velvet, and Porcelain Charms
Mix ribbon widths. A 4-inch plaid bow and a 1.5-inch navy velvet ribbon used together is what makes this tree feel layered rather than themed — the broad plaid gives you pattern and volume, the narrow velvet gives you line. Weave the narrow ribbon vertically through the branches in three or four swoops, then place the plaid bows over the intersections. Buy the navy velvet by the spool, not the yard; you’ll use more than you think.
Call it 50 percent green, 25 percent plaid pattern, 15 percent navy, 10 percent porcelain and gold. The porcelain charms are the smallest percentage and the most memorable detail — that’s usually how it works. To shift this into a warmer room, swap navy for deep burgundy and keep everything else. The proportions matter more than the exact colors, which is why the formula survives a palette change.
21. Woven Wicker Collar Against a Stone Wall
Stone walls are beautiful and busy. Every ornament competes with the texture behind it, and a densely decorated tree in front of stacked stone turns into visual static — you’ll see noise, not a tree. Keep the ornament count 20 to 30 percent lower than you would against a painted wall, lean on fewer, larger pieces, and let warm white lights do the detail work. Sheer curtains nearby help too; they give the eye somewhere to rest.
The woven wicker collar. A fabric skirt would disappear against stone, and a metal collar would sharpen all that texture. Wicker sits in between — an organic material that echoes the roughness of the wall while giving the tree a clean, finished base. Remove it and the tree floats. Keep it and the whole corner — stone, wool, wicker, evergreen — reads as one material story.
22. Pastel Pink and Teal Ornaments on a Green Tree
Pastel trees used to be a kids’-room thing. Now they’re the palette of choice for anyone who wants holiday decor that works with a Scandi-neutral living room. Pink, soft gold, and a hit of teal on a green tree is basically the same color theory as the red-and-green classic — complementary hues, one warm and one cool — just played at lower volume. It photographs beautifully on white paneling and it doesn’t scream in January.
Pastel ornaments are where big-box stores badly undercut boutique brands. Target’s Threshold line runs $12 to $20 for a mixed pastel set, and Walmart’s holiday aisle has dusty pink and teal baubles around $8 a pack. Mix two budget sets with a handful of gold pieces you already own and the tree reads expensive. Total: about $45. Compare with Idea #3 — same green tree, fully saturated energy.
23. Kitchen Flocked Tree with Red and White Starbursts
- Buy white starburst flower picks — 10 to 14 for a 7.5-foot tree.
- Trim stems to 5 inches and bend the wire so each bloom angles slightly upward.
- Place them in a loose diagonal from lower left to upper right.
- Intersperse red baubles in the gaps between blooms, not on top of them.
- Finish with a white star topper so the top repeats the flower shape.
Time: 40 minutes. Materials: $25 to $50.
If the tree lives in the kitchen, clearance is non-negotiable. Keep at least 36 inches between the tree and the range, and never place a tree where a cabinet door opens into it — flocking plus a swinging door equals a mess every morning. Run the lights on a smart plug so the tree doesn’t stay on all day while you’re cooking, and choose LED bulbs that stay cool to the touch.
24. Red Satin Bows with Cream Knit Ornaments
This is a mid-size tree look — 6 to 8 feet, in a living room of roughly 200 square feet or more. The mix of large satin bows and chunky cream ornaments needs breathing room; on a 6-foot tree, use 6 to 8 bows maximum and space them evenly. In a small apartment, drop to a 5-foot tree and cut the bow count in half, or the tree will look wrapped in fabric rather than decorated.
Fabric ornaments collect dust faster than glass, and knit ones can pill if they rub against branches. A 60-second pass with a lint roller before they go up each season handles most of it. Satin bows crease when stored flat in a box — hang them on a hanger in a closet instead and they’ll come out smooth. Faux berry picks shed small pieces, so shake them out over a trash can first.
25. Glossy Red Ornaments Lit by Warm Bokeh
The light temperature. This is a tree with almost nothing on it — glossy red balls and warm bulbs — and the whole effect lives in that warmth. Switch to cool white and the same ornaments go flat and cheap-looking, because cool light turns glossy red into dull maroon and kills the soft glow blooming behind the branches. Warm light at 2700K to 3000K is the entire special effect. Everything else is just a red ball.
Two principles are doing the work here: repetition and restraint. A single ornament shape and finish, repeated at even intervals, creates pattern — the eye reads rhythm instead of clutter. And leaving the tree mostly green means the red goes further. Three dozen ornaments on a full tree reads as more decoration than a hundred on a busy one. That contrast between glossy red and matte greenery is the other half of it.
26. One Continuous Red Velvet Ribbon, Top to Bottom
A single winding ribbon needs a wide spool and a plan. Buy 1.5- to 3-inch velvet — narrow ribbon disappears against a full tree — and allow 6 to 8 yards for a 7.5-foot tree wound top to bottom. Start at the top, anchor with floral wire, and let the ribbon sag slightly between anchors rather than pulling tight. Velvet has a nap, so keep the pile facing the same direction the whole way down or it will catch light unevenly.
- 7.5-foot green tree: $100–$300
- Deep red velvet ribbon, 8 yards: $30–$75
- Red and gold ornament set, 80 count: $35–$80
- Poinsettia picks and topper: $20–$45
- Red wrapping paper and gold bows: $15–$35
- Total: $200–$535
Budget alternative: single-width velvet from a discount fabric store cut into strips, plus last year’s ornaments, gets you the same sweep for about $60.
27. Gold and Red Tree with Sparkling Floral Picks
Think 55 percent green, 25 percent red, 15 percent gold, 5 percent white. The white pieces are the sparkle — small glittered florals and light-catching picks that sit on top of the palette rather than inside it. If you want to go warmer, trade the white sparkle for champagne. If you want more drama, invert red and gold. Same formula, three completely different trees.
Glitter picks are the biggest shedder in the holiday aisle. Unpack them over a sheet, shake them outside, and consider a light mist of hairspray to lock the glitter down — otherwise you’ll be vacuuming gold dust off carpet through February. Glitter florals placed near the top can also look top-heavy, so keep the biggest blooms in the lower two-thirds and let the star have the top to itself.
28. Silver Tinsel and Faux Fur Against Stone
A white faux fur tree skirt looks expensive and rarely is. Walmart and Amazon both carry plush skirts for $20 to $35, and a thrifted faux fur throw draped around the base costs about $12 and looks the same. Silver tinsel is one of the cheapest decorating materials there is — dollar-store strands at $1.50 each, five or six of them, and you’re done for under $10. This is the budget version of Idea #14: same silver story, different energy.
- Put the skirt down before the tree, not after — you’ll save yourself twenty minutes.
- Test the fairy lights on the floor and look for dark sections.
- Add tinsel in layers, starting at the back of the tree.
- Run a second pass of lights over the tinsel, not under it.
- Fluff the faux fur outward with your fingers at the end.
Time: 2 hours for a 9-foot tree. Cost: $30 to $45.
29. Horizontal Red Velvet Ribbon Against Neutral Walls
- Confirm the wall behind the tree is neutral — bold ribbon loses its punch against a busy pattern.
- Check the height of nearby art so the tree doesn’t crowd it.
- Measure the tree’s widest point and add 6 inches before you place furniture.
- Decide whether the ribbon will be secured with wire or clips, and buy both.
- Make sure the outlet isn’t behind the tree once it’s positioned.
Horizontal ribbon bands work best on trees 7 feet and taller in a room with 9-foot ceilings or higher — the horizontal lines need vertical space above them or the tree looks compressed. In a room with 8-foot ceilings, use fewer bands: two or three instead of five. This style also wants actual wall space. A tree pushed into a corner loses the clean neutral backdrop that makes the red read so sharply.
30. Red Peonies and Plaid on a Flocked White Tree
Flocked branches make bright colors pop harder, because white reflects light back onto the ornaments instead of absorbing it into dark green. That’s why the crimson peonies and red knit balls look almost lit from within here. The plaid adds a second pattern layer, and the frosted berry sprigs tie the whole thing back to the flocking. Take away the white branches and this same arrangement goes flat and heavy.
Large floral picks need structural support. A peony head on a flocked tree will sink toward the trunk unless you wire the stem to the branch closest to its base and bend the bloom forward. Place 6 to 9 large blooms on a 7.5-foot tree, always at the outer third of the branch. Any deeper and the flocking swallows the flower completely.
31. Gold Leaf Twelve Days Ornaments on Rustic Wood
Heritage-themed ornaments are having a real moment. Twelve Days of Christmas sets, nutcrackers, and vintage illustrated baubles are all climbing in searches as shoppers look for pieces that feel collected rather than mass-produced. The appeal is simple: a numbered set gives you a built-in reason to hang ornaments in a specific order, which turns decorating into a small ritual instead of a chore.
Each ornament carries a number and a scene, which means the set tells a story as you move around the tree. That’s rare. Most ornament collections are a color story; this one is a sequence. Displayed together on a rustic wood surface with red berry sprigs and thin gold cords, they read as a collection worth keeping — the kind of thing you pull out every year because it means something, not because it matches the ribbon.
Thirty-One Trees, One Very Cozy December
Here’s the thing about traditional Christmas tree decor — it’s not about matching a trend, it’s about building something that feels like yours, year after year. Pick two or three ideas from this list, mix them with what you already own, and you’ll end up with a tree that looks collected rather than copied.
And if you want to be the person whose tree everyone photographs at the party? You already know what to do. Save this to Pinterest now, and pull it back up when the boxes come down from the attic.
